Specifications
| Length (LOA) | 30' 10" (30.83 ft) (incl. engines / outboards) source |
| Beam | 8' 6" (8.5 ft) source |
| Draft | 30 in source |
| Air draft / bridge clearance | 10' 3" (10.25 ft) (Highest of the builder's figures ('Bridge clearance (mast up)'). Cutwater prints 'Bridge clearance (mast down) 8' 7" | 2.62 m'; 'Bridge clearance (mast up) 10' 3" | 3.12 m'.) source |
| Dry weight | Builder publishes only a weight with engine |
| Approx. weight with engine (builder figure) | 6200 lb Builder figure with engine(s), not a dry weight: "Weight (dry w/engine) 6,200 lbs" source |
| Fuel capacity | 116 gal source |
| Water capacity | 22 gal source |
Only figures the builder publishes are shown. Missing rows were not published in the sources we checked.
Official model page on cutwaterboats.com
Builder
Brochures and media
USCG recalls
No recall on the USCG recall list matches this model name. Check a specific boat's HIN with a dealer.
Questions and answers
How long is the Cutwater C-248 C?
The Cutwater C-248 C is 30' 10" long (30.83 ft, incl. engines / outboards), per the builder's published specs. source
What is the beam of the Cutwater C-248 C?
The beam (width) is 8' 6" (8.5 ft). source
What is the maximum horsepower for the Cutwater C-248 C?
This is not published by the builder in the sources we checked for the Cutwater C-248 C. Ask a dealer for the current figure.
Find an official dealer
How many people can the Cutwater C-248 C carry?
This is not published by the builder in the sources we checked for the Cutwater C-248 C. Ask a dealer for the current figure.
Find an official dealer
How much fuel does the Cutwater C-248 C hold?
Fuel capacity is 116 gallons. source
How much does the Cutwater C-248 C weigh?
The builder publishes only a weight with engine: approx. 6,200 lb with engine(s) (builder figure). It is not a dry weight, and fuel, water and gear add more; see the source for the exact engine. source
What does the Cutwater C-248 C cost?
This is not published by the builder in the sources we checked for the Cutwater C-248 C. Ask a dealer for the current figure.
Find an official dealer
Is the Cutwater C-248 C still in production?
It is listed as a current model on the builder's site. source
Will the Cutwater C-248 C fit under a bridge?
The builder's published air draft (bridge clearance, the height above the waterline) is 10' 3" (10.25 ft). Note: Highest of the builder's figures ('Bridge clearance (mast up)'). Cutwater prints 'Bridge clearance (mast down) 8' 7" | 2.62 m'; 'Bridge clearance (mast up) 10' 3" | 3.12 m'. Load, trim, water level and added gear (antennas, radar, a raised top) change the real clearance, so leave a margin and check the source. source
Are there USCG recalls for the Cutwater C-248 C?
We did not find a USCG recall whose model name matches this model. That is not a guarantee: check the boat's HIN on the USCG recall list or with a dealer. source
Similar models
same type, 30.75 ft vs 30.83 ft, price not compared (unpriced)
same type, 30.58 ft vs 30.83 ft, price not compared (unpriced)
same type, 31.42 ft vs 30.83 ft, price not compared (unpriced)
same type, 32.08 ft vs 30.83 ft, price not compared (unpriced)
same type, 32.25 ft vs 30.83 ft, price not compared (unpriced)
same type, 29 ft vs 30.83 ft, price not compared (unpriced)
